How To Remove Old Toilet Tank Lever

Unhook flapper chain from tank lever. So enter the reverse thread in which you would tighten to the left and loosen or remove to the right thus keeping the tank lever from eventually flopping around.

Kohler Toilet Tank Flush Levers

A chain connects that arm to the flush valve or toilet flapper.

How to remove old toilet tank lever. Loosen locknut by turning counter-clockwise. Throw the old handle away once you take it out from the tank. Shut the water supply off and drain down the tank by flushing it if you do not want to work in the cold water.

Remove locknut by turning it clockwise. Remove Old Fill Valve The valve nut locks the toilet valve body into the toilet tank. Removing the Old Lever.

Pliers may be needed Slide nut off lever arm. Using a pair of adjustable pliers loosen the. Using adjustable pliers or adjustable wrench remove the valve nut.

Pull lever mount off shaft as shown above. There is usually just one nut that holds it in place. Loosen the nut from inside of the tank.

Removing a toilet tank lever is not too hard. In this How To Fix a Toilet video Bob shows you his method of cutting off the fused lock nut from a toilet tank handlelever. Pull the old handle out from the toilet.

Older style handles were made. How to Remove Toilet Tank Bolts Now use your wrench to loosen the tank bolt nuts from underneath the toilet bowl. Unhook the toilet chain from the arm noting which hole the clasp is fastened into.

To do this lift off the top cover of the toilet tank. Now pull out the old handle gently as you move sideways to allow the lever to pass through as well. This should fit onto the top of the tank but it will not usually be attached.

Many older vintage toilet tank levers were made of a cheap white metal composite which would eventually fuse to the threads of the handle making it impossible to remove. Unclip the chain so the rod is free. Tighten locknut hand tight in a counter-clockwise direction.

A nut holds the toilet handle in place. Once the handle is completely detached from the chain pull the handle straight out from the toilet. Unscrew the nut until where you can continue by hand.

Sometimes the bolts are corroded and will not just come off. As you remove the handle you may feel some resistance. To remove the existing toilet flush lever you will need to be able to access the toilet tank.

Remove the lid from the toilet tank and set it aside. Pull lever through tank hole. Locate the chain attached to the rod.

Simple once you see how its do. A step-by-step easy to follow tutorial video showing you EXACTLY HOW to remove and replace a broken Toilet Handle or Lever. This makes it easier to remove to do maintenance and repairs.

Maneuver the handle so the long lever attached to it slides through the hole where the handle used to be. If you find that the bolts are swiveling use the wrench to back the nut off while you unscrew the bolt with a long screwdriver from inside the tank. Unscrew to the end and remove it.

Remove lever arm from package. Remove and lift the fill valve from the tank.

Our Most Common Toilet Flush Levers