How To Remove An Old Toilet Flange

If it isnt then you will have to cut away the old flange. This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe.

Pin On Youtube

Turn off the water supply by rotating the water supply knob behind the toilet in a clockwise direction.

How to remove an old toilet flange. Youll need to sponge out any water left in the bottom of the bowl and tank. Empty the toilet by flushing it repeatedly until both bowl and tank are empty. Use the screwdriver to remove the screws.

Empty any remaining water in the toilet by flushing it. Position the reciprocating saw flush off the floor and cut off the top part of the flange. If the plastic pipe has a 3-inch inside diameter youll have to remove the old flange from the outside of the pipe.

Lay old newspapers or old rags on the. Use the saw to make vertical cuts round the toilet flange sleeve. In case you need to remove severely damaged flange collars the plain old hammer and chisel are the tools you will need to remove the cast-iron flanges from the assembly.

Turn off the water supply either the main valve or just the toilet line. Heres how to remove your toilet flange in seven easy steps. Place the seal into a plastic bag for disposal.

Before Removing the Flange. The flange is screwed to the floor using 4 screws. Slide the toilet bolts out of the grooves on the flange.

3 Unscrew the flange from. Now that you have removed the broken flange you can now replace it with a new one. See the shopping list tools and steps.

Buy Compact DeWalt Drill - httpsamznto2VrvbGyBuy Oatey PVC Glue - httpsamznto39AKB49Buy TopBuilt Hammer - httpsamznto36tuXpuBuy Concrete Chise. This DIY video will show you how to remove an old 4 PVC flange that is cemented to a 4 pipe that you may do it without special tools. Rotted toilet flange repaired new toilet installed.

Remove the main piece of the wax seal from the base of the toilet by placing a rag or paper towel over the seal and grasping it with a gloved hand. Rock the seal back and forth to loosen it then pull it straight out from the toilet bottom. This Old House plumbing and heating expert Richard Trethewey shows how to replace a badly corroded cast-iron flange.

Clean all the wax off the flange with a putty knife and deposit the wax on a sheet of old newspaper for disposal. Disconnect the water supply hose from the toilet tank. You will need to r.

Don a pair of gloves. Rotted toilet flange repaired new toilet installed.

Pin On Plumbing Perfection