How To Remove Tall Bushes

3 Dig around base of shrub with pointed shovel. If you hit the soil with some water pressure the dirt will simply wash right away.

How To Remove A Shrub Or Bush The Easy Way

Use a pole pruner if the top of your bush is too tall to reach.

How to remove tall bushes. Shear the top and sides of the tall shrub to control size if desired. Here is a rule to follow when pruning back big shrubs. Renovation pruning involves cutting a third of the plants stems down to a height of 2 feet or less.

Shear down the tall grass to a height of 1 to 2 feet using pruning shears or a hedge trimmer. Set a jack stand or concrete blocks on one side and set up your jack on the other. Ask This Old House landscape contractor Roger Cook helps a homeowner remove foundation shrubs that have overtaken the front of her houseSUBSCRIBE to This Ol.

If it doesnt pull easily slide the end of a lever bar under the trunk so that it is perpendicular to the trunk. Then lay scraps of plywood on each side of the shrub. An easy solution to remove the dirt and hence lightening the shrub or bush is to hit the soil with a garden hose or even a power washer.

Hammer the other end of the bar so that it is completely under the trunk. 1 Use bypass loppers to cut away smaller branches around outer portion of shrub. According to McDonald this should ideally be done after the shrub has bloomed every year for three consecutive years and will eventually produce a rejuvenated more reasonably sized shrub.

Cut them off at the trunk. Pull the main trunk out of the ground. 4 Cut through roots at base of stump with a garden mattock.

Contractors who remove shrubs will either charge by the hour or by the size of the shrub. Cut off most of the branches that are growing directly from the trunk. Youll be left with only the shrub or bush which can be cut up burned or moved to curb for disposal.

Lay a beam across them and tie the root to the beam with a chain. Pruning them correctly will not kill them. Start by digging around the base of the shrub and cutting all the roots you can get at.

Either bite the bullet and hire landscapers to remove the behemoths or prune them down yourself to the proper size. Removing Shrubs by Hand Measure 20 inches from the soil and cut off all branches above that height with sharp pruning shears or a saw depending. Rake up the fallen blades and dispose of them in your trash or in your mulch or compost pile.

2 Cut through thick branches deep inside of the shrub with a chainsaw. This is also the time to inspect the root ball and remove. Immediately remove any dead branches by cutting them as close to the shrubs main stem as possible.

Remove only some of the branches to keep the bush looking. Pry up the stump of the shrub or bush by pressing down on the other end of the lever bar. As a rule of thumb small shrubs are 1 to 2 feet tall medium shrubs are 2 to 4 feet tall large shrubs are 4 to 6 feet tall and very large shrubs are over 6 feet in height.

Get your shrub off to a good start.

Remove Hedges